Advanced Bridge Training GDOT

What spect section covers Concrete?

what spec section covers piles

what spect coverrs layout

what spec section covers steel reinforcement

what spect section covers bridge removal

what spectial provision covers caissons

Spec section 540 requires existing bridges to be removed _____ feet below groundline or streambed when replacing with a new bridge and not a culvert

What are 3 common types of bridge foundations found in D7

What two items are required to be submitted to Geotech prior to driving steel H piles

Who is required to inspect Cassions prior to placement of reinforcement cage or concrete

Is the substructure or the superstructure designed first

Steel H piles are considered ___ piles

PSC piles are considered ____ piles

What's the two most important items to look for in a PDA report prior to driving production piles

Encasements used to build structures in water or wet areas are called what

Where can the pile driving criteria be found

Shop drawing are required for work bridges

Wat is the contractor required if required resistance is achieved on steel H piles

Is minimum tip still required to construct to aid in pile driving

Total weight of a 10' section of 14x73 steel H pile

When is a concrete tremie required

What's required on a spread footer for inspection purposes

What concrete mix is typically used in a caisson

During a 30' dry shaft caisson, concrete may be placed without use of a tremie

What percentage compaction is required 50' from a bridge to end?

When adding nwater to concrete at the job stie, how many drum revolutions are required

What is the series # for bridge plans in a set of plans

What is the contractor required to submit prior to pouring structural concrete during cold weather

Part of the bridge that sits above the caps is called

When is triple reinforcement bundling allowed on a bridge

How long must a bridge deck stay covered after placement of concrete

what is the dry run tolerance on a bridge deck steel cover

what is the maximum lift thickness when backfilling for approach slab construction

What's the minimum bridge rating required to meet teh departments performance metric on bridge steel cover

If a bridge deck is on a 70 degree skew, does the deck screed have to be on the same skew