ABM IQT Block 3 Jeapordy

46 flashcardsby Stowe
Study these flashcardsFree · spaced repetition · iPhone, Android, Mac & web

All cards

1
A new detection oppurtunity occurs every ____ seconds
10
2
What is an area where tracking is prohibited?
ATE
3
What is the third sensor report?
Established track
4
What is the default configuration for the MSI?
ATI
5
What are areas used to specify tracking permissions?
ATE/TSMA
6
What is second time around detection?
System goes from 2x2 processing to 3x3 processing
7
Whats one modulation period during whichduring which transmissionand reception takes place?
A "slant"
8
What improves range resolution and clutter elimination?
Pulse coding/ Pulse compression
9
What radar modes provide the best pulse doppler?
Long sland PD mode
10
What are the two detections with very similar PD shift and azimuth locations called?
Multipath returns
11
Why does the radar operate at 3 db gain compression above 35,000 ft?
To prevent wave guide arcing
12
How does the radar achieve acceptable range resolution?
Pulse compression
13
How does the AMSC threshold differ from BTH threshold?
Its less sensitive
14
What capability is NOT available with pulse radar?
Height finding capability
15
(T/F) Pulse radar is a very long range and high power radar
True
16
A track with an ID of "Unknown" was interrogated with mode 5 with no response. What will happen to the tracks ID?
It will remain "Unknown"
17
What CAN'T be done with the default combat ID?
It can't be edited or Modified
18
In combat ID, what is the purpose of changing the pending ID time?
It keeps the track from being upgraded to "Unknown" over the datalink. It stays "Pending".
19
For a track to fulfill the mode 2 match contributor in the combat ID application, SIF data for the requested track must be inputted in one of which two applications?
SIF List/ATO Manager
20
(T/F) A track with a contributorthat is weighted low in the combat ID ruleset will be changed to the ID of friend, assuming there are no other contributors fulfilled.
False (Assumed friend)
21
What is the purpose of the datalink area?
They are configured so tracks can be told on the datalink
22
What is the surveillance network participation group number?
NPG 7
23
What is the track numbering system for Link 16?
TN
24
What is the track numbering system for Link 11?
DLRN
25
What is the unit that establishes Link 16 time synchronization?
Network Time Reference (NTR)
26
What is a Link 11 address for a unit?
P.U.
27
What will an uncorrelated EA strobe look like?
Dot-Dashed Lines
28
In order to establish cooperative passive tracking via PAD both agencies must be _________
Operating in either Link 11 or Link 16
29
What window can assist in recognizing and countering EA?
Sensor counts window
30
Where can a list of all local and remote EA jamming requests be found?
Link control window
31
What do correlated EA strobes look like?
Solid lines
32
What alert is generated when PDA is enabled and the MCS consistently detects either the loss of PDA data or or the PDA data is marked "Invalid" by the radar?
PDA INVALID
33
What alert is generated when radar or IFF differential threshold is nearly reached?
AZIMUTH ERROR HIGH
34
What alert is generated when the system detects the presence of radar or IFF electronic attack?
EA DETECT
35
What alert is generated when there is ID ambiguity due to merged tracks with different IDs?
AMBIGUOUS ID ATTENTION
36
What alert is generated whenthere is a conflict between system ID and a track's mode 5 status?
ORGANIC ID CONFLICT
37
Radar mode where pulse doppler is active in long slant ELSCAN mode; Pulse is active BTH?
LEL/BTH
38
What is the criteria for determining which radar RF set to use?
Assesment of overall air picture quality
39
What radar is affected by range rate? (radial velocity?)
Pulse doppler
40
What are the two types of radar wake up?
Normal and Fast
41
What are the optimum E-3 flight parameters for Altitude and Speed?
FL290 and 360 +/- 50 knots ground speed
42
What cabinet holds the IFF hardware equipment?
E-17 cabinet
43
What minimum IFF equipment is required for system operation?
R/T, KIV 77, RTDP, Power supply
44
What modes can be placed in A/B/G fields?
1/2/3/3C/Rotate
45
What mode 5 format CAN'T be continuously interrogated?
Format 3 (Lethal)
46
IFF sectors must be ______________________ to take effect.
Dragged into the active folder
Study all 46 cards for free