Land Surveying and Geomatics
Réviser ces flashcardsGratuit · répétition espacée · iPhone, Android, Mac et web
Toutes les cartes
1
What is the cosine of an angle equal to in terms of its complementary angle?
The sine of an angle equal to 90^\circ minus the angle
2
How is probable error defined in measurements?
The limits between which the true error has a 50-50 chance of falling
3
How is chromatic aberration of a telescope lens system best reduced?
By using crows and flint glass lenses
4
What is a pantograph used for in drafting and surveying?
To enlarge or reduce the scale of a drawing
5
What is the primary purpose of using the method of least squares in surveying?
For adjusting triangulation nets
6
Which of the standard trigonometric and angular unit relationships is correct?
None of these
7
What is the primary historical use of the Gunter's or Surveyor's chain?
As the unit of measure for Surveys of the Public Lands
8
When measuring with a steel tape over rough or sloping ground by holding it horizontally, what causes the greatest error?
Holding the tape out of level
9
Which end of the steel tape should the head chainman have ahead during measurement?
The end ahead which is best adapted to the procedure
10
What is an important step for chainmen at the very beginning of a steel tape survey?
To note the exact location of the zero and 100 ft. marks
11
What is the usual manner of supporting a steel tape under general conditions?
Supported at ends and center
12
How should the head chainman stand to prosecute work rapidly and accurately?
So as to face the tape and off the line of sight
13
How is a "station" defined when used in measuring linear distances?
As a point at a multiple of a full tape length established by continuous chaining
14
In its broadest sense, what is a "station" in connection with distance?
Any point on a line set by continuous chaining from a point of beginning
15
Why must corrections be applied when precision greater than 1/10,000 is required with a steel tape?
Because the tape is seldom used under conditions for which it was standardized
16
What causes the most serious errors in ordinary taping?
Holding one end of the tape too high or too low and not making the slope correction
17
What is a level surface used as a reference for measuring vertical distances called?
A datum plane
18
In what aspect does profile leveling differ from differential leveling?
In the number of foresights
19
In what aspect are profile leveling and differential leveling alike?
In principle
20
What does the term "backsight" mean in leveling?
A rod reading on a point whose elevation is known
Plus de flashcards : Sciences
Biology Chapter 5: PhotosynthesisSciences · Anglaisun étudiant OutLearnVibration TestingSciences · AnglaisAndreiGROUPSciencesAndreiUnderstanding and applying medical anthropology Ch. 2-8Sciences · AnglaisKailachp 17: The Microorganisms Viruses, Bacteria, and ProtistsSciences · Anglaislizzieowizzie4.16 Organic Synthesis ✓Sciences · AnglaisIzzyComputational biology UNIT 1Sciences · Anglaiscaroline05. Vibrations and SoundSciences · AnglaisNicoChapter 9 and 10 peopleSciences · AnglaisOliverBiological Molecules 1 exam qs Sciences · AnglaisBelle🌸Unit 3.3 RespirationSciences · AnglaisMariPrinciples of Cell + Membrane FunctionSciences · AnglaisKrisMedCards
Révise ces decks dans l’app
Gratuit sur iPhone, Android, Mac et le web. Ajoute n’importe quel deck à ton compte en un tap.
