1tracert -d
Do not resolve addresses to hostnames
2tracert -h *and then a number*
Gives the command a maximum number of hops to search for a target
3tracert -j *and then a host-list file*
Loose source route following what's provided in the host-list file (works with IPv4-only)
4tracert -w *and then a number*
Wait that amount of milliseconds for each reply
5tracert -R
Trace rount-trip path (IPv6-only).
6tracert -S *then you provide a srcaddr*
Gives the command a source address to use (IPv6-only).
7tracert -4
Fource using IPv4.
8pathping -g *then you provide a host-list file*
Loose source route along host-list
9pathping -h *and then a number*
Maximum number of hops to search for target
10pathping -i *and then you input an address*
Use the specified source address
11pathping -n
Do not resolve addresses to hostnames
12pathping -p *and you type a number*
P stands for period. You wait this amount of milliseconds between pings.
13pathping -q *and you type a number*
Number of queries per hop.
14pathping -w *and you type a number*
Wait this amount of milliseconds for each reply.
15pathping -4
Force using IPv4
16pathping -6
Force using IPv6
17shutdown /i
Display the GUI
18shutdown /l
Log off. This can't be used with the /m or /d options.
19shutdown /s
Shutdown the computer
20shutdown /sg
Shutdown the computer. On the next boot, if automatic restart sign-on is enabled, automatically sign in and lock last interactive user.
21shutdown *SLASH r*
Full shutdown and restart the computer.
22shutdown *SLASH g*
Full shutdown and restart the computer. After the system is rebooted, if Automatic Restart Sign-On is enabled, automatically sign in and lock last interactive user.
23shutdown /a
Abort a system shutdown
24shutdown /p
Turn off the local computer with no time-out or warning.
25shutdown /h
Hubernate the local computer. Can be used with the /f option.
26shutdown /fw
Combine with a shutdown option to cause the next boot to go to the firmware user interface.
27shutdown /e
Document the reason for an unexpected shutdown of a computer.
28shutdown /o
Go to the advanced boot options menu and restart the computer. Can only be used with the *SLASH r* option.
29shutdown /m \\COMPUTER-NAME
Specify the target computer
30shutdown /t ###
Set the time-out period before shutdown to ### seconds. Default is 30 seconds and max is 10 years. /f parameter is implied.
31shutdown /c "comment"
Places a comment on the screan for the reason of the restart or shutdown. Maximum of 512 characters.
32shutdown /f
Force running applications to close without forewarning users.