1Pharmacoeconomics
the description and analysis of the costs of drugs and pharmaceutical services as well as their effects on individuals, health care systems, and/or society.
2Costs vs. charges
charges are actually costs (also termed expenses) plus profit
3Direct costs
Costs associated with prevention, detection, or treatment of a disease or illness
4Direct nonmedical costs
Costs as a result of disease or illness that do not involve the purchase of medical services
5Indirect costs
Costs associated with morbidity or mortality, related to change in productivity as a result of disease or illness
6Intangible costs
Costs associated with nonfinancial outcomes of disease
7Incremental costs
Additional costs to purchase additional benefit or effect of medical care
8Fixed costs
costs that remain constant and are not dependent on volume of use
9Variable costs
costs depend on volume of use
10Cost analysis
Compares only cost (i.e., no effectiveness) of two or more treatments or services
11Cost-benefit analysis
Both costs and outcomes are measured in monetary units
12Cost-effectiveness analysis
Costs are measured in monetary terms, whereas outcomes are measured in units of effectiveness.
13Incremental cost-effectiveness ratio (ICER)
the additional cost to the next most effective intervention producing another unit of output.
14What are the axes of a cost-effectiveness plane?
x-axis is effectiveness; y-axis is cost
15Cost-minimization analysis
the outcomes are virtually identical (e.g., effectiveness) except for costs
16When should cost-minimization analysis not be used?
Should not be used if no evidence supports the therapeutic equivalence of the treatment alternative
17Cost-utility analysis
outcome is expressed with respect to patient preferences, quality of life, or quality-adjusted life-years (QALYs)
18What are the reference utility values for perfect health and death?
perfect health = 1.0 and death = 0.0
19Which direct methods can measure health-state utilities?
Direct approaches include rating scales, time trade-off (acute and chronic conditions), and standard gamble (acute and chronic conditions).
20Which indirect methods can measure health-state utilities?
Indirect approaches include multi-attribute health state scores (e.g., quality-of-life assessment tools).
21How are quality-adjusted life-years (QALYs) calculated?
the life-years gained is determined and then multiplied by the utility of that life-year.
22Is cost analysis a full or partial evaluation?
Cost analysis (partial evaluation)
23How can pharmacoeconomics inform formulary management?
Formulary management to determine whether newly marketed or approved medications should be included/excluded with/without use criteria that may affect prescribing patterns
24Why are critically ill patients at increased risk of ADEs?
a higher chance of being administered a high-risk medication and the potential for altered response to medications because of altered pharmacokinetics and organ failure.
25Medication errors
Mishaps that occur during the medication use process (e.g., reconciling, prescribing/ordering, transcribing, dispensing, administering, monitoring)
26Near misses
Medication errors that are intercepted and stopped before they occur
27Medication error Category A
No error – Scenarios that can cause error
28Medication error Category B
An error occurred but did not reach the patient
29Medication error Category C
An error occurred and reached the patient but did not cause harm
30Medication error Category D
An error occurred that reached the patient and required monitoring to confirm that it resulted in no harm to the patient or required intervention to prevent harm
31Medication error Category E
An error occurred that may have contributed to or resulted in temporary harm to the patient and required intervention
32Medication error Category F
An error occurred that may have contributed to or resulted in temporary harm to the patient and required initial or prolonged hospitalization
33Medication error Category G
An error occurred that may have contributed to or resulted in permanent patient harm
34Medication error Category H
An error occurred that required intervention necessary to sustain life
35Medication error Category I
An error occurred that may have contributed to or resulted in the patient’s death
36Adverse drug event (ADE)
Injuries resulting from use of a drug
37How does an ADE differ from an ADR?
ADE is the broader term used to describe any harmful event associated with a medication, including inappropriate use such as an overdose, whereas ADR is used when an adverse response, including harm, occurs with normal use of the medication.
38Preventable ADE
A preventable ADE occurs when a breach of standard professional behavior, practice, or technique was identified or when necessary precautions were not taken
39What proportion of ADEs does the chapter say are preventable?
About 30%–50% of all ADEs are preventable.
40Nonpreventable ADE
ADEs not associated with a medication error and are unintended reactions without known mitigation strategies resulting in patient harm
41Adverse drug reaction (WHO definition)
any response to a drug which is noxious and unintended, and which occurs at doses normally used for prophylaxis, diagnosis, or therapy of disease, or for the modification of physiological function.
42What is the main difference between the WHO and Karch and Lasagna ADR definitions?
according to the WHO definition, therapeutic failures are an unintended effect and an ADR, whereas according to the definition by Karch and Lasagna, they are not.
43How does the FDA define a serious adverse drug event?
the patient outcome is death, life threatening (real risk of dying), hospitalization (initial or prolonged), disability (significant, persistent, or permanent), congenital anomaly, or required intervention to prevent permanent impairment or damage.
44FAERS
a postmarking surveillance tool for medications and biologics.
45VAERS
identifying potential signals for adverse events associated with vaccines licensed for use within the United States.
46What should a comprehensive ADE program include?
A comprehensive ADE program should have a policy and procedure, with guidelines for ADE detection, reporting, management, surveillance, and education.
47Failure mode and effects analysis (FMEA)
a proactive, structured method to identify potential failure points within a system that may lead to an ADE.
48Root cause analysis (RCA)
a structured method to determine why an ADE occurred (i.e., retroactive)
49What details should be recorded for a medication allergy?
the specific medication that caused the allergy, the type of reaction, and when the allergy occurred
50How long should ADR and ADE records be maintained?
recorded in the electronic medical record and maintained in the record indefinitely.
51How does the chapter explain alert fatigue?
increasing the number of alerts may result in decreased attention to interacting with the alerts.
52What is a limitation of voluntary event reporting?
events are grossly underreported.
53Trigger or tracer drugs
drugs that are routinely prescribed to treat ADEs, such as antidotes, or physiologic antagonists or agents for gastric decontamination.
54Most commonly used ADR causality instrument
Naranjo criteria for causality determination
55Causality instrument for drug-induced liver injury
RUCAM
56Which factors are considered in causality assessment?
temporal sequence, dechallenge (removal of the suspect drug), rechallenge (reintroduction of the suspect drug), evaluation of other causes, objective evidence that is available or obtained, and history of a reaction to a similar drug.
57Advantage of direct observation
capturing medication administration errors that are not typically identified with other detection methods.
58Hawthorne effect
if an individual is aware of being observed, the individual may change behavior to be “optimal” (i.e., the “Hawthorne effect”).
59GRADE recommendation strength codes in the 2017 SCCM guideline
quality of evidence: A = high to D = very low; strength of recommendation: 0 = no recommendation, 1 = strong, 2 = weak
60Four stages of the medication use process
prescribing, dispensing, administration, monitoring
61SCCM guideline: computerized provider order entry
Guidelines suggest implementing computerized provider order entry to decrease medication errors and preventable ADEs (2B).
62SCCM guideline: clinical decision support
Guidelines suggest using CDS systems to decrease the number of medication errors and ADEs (2C).
63SCCM guideline: protocols and bundles
Guidelines suggest using protocols\/bundles to reduce medication errors/ADEs (2B).
64SCCM guideline: safe medication concentrations
Guidelines recommend compliance with safe medication concentration practices (e.g., premade mixes, standardized medication concentrations within institution) to reduce the number of medication errors and potential ADEs (1B).
65SCCM guideline: tall man lettering
Guidelines suggest use of medication labeling practices (e.g., tall man lettering) for sound-alike look-alike drugs to reduce medication errors (2B).
66SCCM guideline: barcode medication administration
Guidelines suggest use of bar code medication administration (BCMA) to reduce medication errors and/or ADEs in the ICU (2C).
67SCCM guideline: smart infusion pumps
Guidelines suggest smart intravenous infusion pumps be used to reduce the rate of medication errors and ADEs (2C).
68SCCM guideline: direct observation
Guidelines recommend use of direct observation as an active medication surveillance system to identify the medication errors (1A).
69SCCM guideline: targeted chart review
Guidelines suggest targeted chart review to increase ability to detect ADEs compared with voluntary reporting (2B).
70Drug interaction
When the effects of one drug can be changed by the presence of another substance
71How can a documented drug interaction be classified?
A documented drug interaction with known outcomes can be considered a medication error, a preventable ADE, or an ADR, depending on clinical context.
72How can drug-drug interaction alert fatigue be mitigated?
Drug-drug interaction alert fatigue can be managed by reducing the alert number, using severity or tiering of the interaction as a criterion for alert selection.
73What factors are considered when assessing drug-interaction causation?
a temporal relationship, consideration of the pharmacologic properties of the object and precipitant drug, patient factors and disease states, the possible contribution of other drugs, and, when possible, a positive dechallenge.
74Why should the Naranjo nomogram not be used for drug-drug interaction cases?
ADE nomograms such as the Naranjo nomogram are designed to evaluate ADEs, not drug-drug interactions
75Drug interaction probability scale (DIPS)
The drug interaction probability scale may be used to determine drug-drug interaction causation
76What Joint Commission requirement governs formulary selection?
develop and approve the criteria for selecting medications into the drug formulary.
77Risk Evaluation and Mitigation Strategies (REMS)
medications with known significant safety concerns (e.g., birth defects, hepatotoxicity)
78Formulary cost evaluation: budget impact analysis
Cost acquisition and total cost of care: This is a good application of the budget impact analysis.
79What is the P&T committee's formulary responsibility?
The P&T committee is responsible for maintaining the drug formulary and ensuring that new medications that can improve patient care are reviewed for formulary inclusion.
80How should prospective randomized trials be weighted against retrospective studies?
Prospective double-blind randomized controlled trials should have greater weight than retrospective cohort and case-control studies
81When should case reports be used in formulary review?
Case reports should be used only when no other evidence is available.
82What EHR changes should accompany adding a drug to the formulary?
appropriate CDS such as dosing and recommended monitoring, as well as information on formulary restrictions.
83When should a newly added formulary drug be reassessed?
preferably within 3–6 months and again in 1 year.
84Effectiveness
Effectiveness is the use of a drug in the real-world setting outside a randomized controlled trial
85When should formulary drug classes be reassessed?
All drugs on the formulary within a class should be assessed annually or more often when there is an important change in prescribing information, when a landmark trial or publication affects the drug’s use, or when new FDA label-approved agents are available within the drug class.