1Who is responsible for furnishing the proper PPE for techs. working in the field?
Your employer
2Who is responsible for training techs. how to properly use the PPE?
Your employer
3Who is responsible for using the proper PPE?
The technician
4When working with chemicals indoors what is the minimum proper PPE?
Chemical resistant goggles and chemical gloves
5When using chemicals outdoors when is the minimum proper PPE?
Chemical resistant goggles, face mask, chemical gloves
6When are safety glasses required?
All the time when working on equipment fi you do not wear prescription classes
7When are hard hats required?
When there is a chance of something fall and hitting your head
8What type of hard hat suspension is the best?
Ratchet
9What type of gloves are required when working on hot equipment?
Hot mill gloves
10Whenever you are working on equipment with the power energized what minimum PPE is required?
Electrical lineman's gover and insulated tools
11What is the minimum class lineman's glove you should be issued?
Class 0
12What special care is required for lineman's gloves?
Keep them in protective packaging when not in use. Do not use with chemicals
13Who is responsible for reporting any damage to your lineman's gloves?
The technician
14What is the min. category rating for electrical meters required for foodservice technicians?
CAT 111
15Besides the meter, what else must have the same CAT rating?
Meter leads
16When are insulated tools required?
Whenever serving energized equipment
17Jos is out working on a microwave oven. He goes to turn an adjustment screw while the oven is energized. He is using a standard screwdriver, touches a live connection and received a serious shock.
What violations did Joe create/commit?
Did not wear electrical lineman's gloves, and did not use insulated gloves
18Who is responsible for those violations?
Joe if he had the proper PPE. His employer if he did not have the proper PPE
19What kind of screwdriver was Joe required to use?
Insulated
20What do you do to stop the bleeding?
Apply direct pressure
21What is the first aid for a serious burn?
Run cold water over it. If serious them seek medical attention
22Every tech. should complete a Red Cross first aid class. (T or F)
True
23A class B fire extinguisher is used for what?
Oile and grease fires
24What class fire extinguisher is required for an electrical fire?
Class C or BC
25The fire extinguisher carried in your service vehicle should be what class?
BC
26Lockout Tagout programs and training are an OSHA requirement. (T or F)
True
27Who is responsible for supplying LOTO equipment?
The employer
28Who is responsible for LOTO training?
The employer
29Who is responsible for using the LOTO when servicing equipment?
The technician
30How many locks must be used to LO a power source?
One for every person working on the equipment
31Who is the only person allowed to remove a lock used on a LO device?
The person who installed it, or a supervisor only after ensuring the person is no longer on the jobsite, and has no part of his duties on the job incomplete