1What chapters and sections of DMC 2010-13 cover isolated survey returns?
Chapter 6, Sections 178 to 185
2What form prescribed by the LMB must basic survey returns for isolated surveys be accomplished in?
LMB prescribed forms
3Who must sign and seal the letter of transmittal in isolated survey returns?
The Geodetic Engineer
4What annex of DMC 2010-13 lists the conventional symbols for original drafting film plans?
Annex II
5When is a Parcel Information Sheet (PIS) required?
In the survey of Alienable and Disposable lands such as cadastral survey, Pls, Gss, and Tss
6Which property types are exempt from submitting a Parcel Information Sheet?
Ap and titled properties
7What documents are required for original field notes in isolated surveys?
The original field notes and field notes cover duly notarized
8Which survey return type only requires the field notes cover instead of full field notes?
Ap
9Which survey return type is exempt from requiring a survey notification letter?
Ap
10Which survey returns are exempt from Astronomical Observation Computation?
As, Ap, and Cvn
11What DAO 2007-29 section governs the Certificate of Instrument Registration?
Section 22
12Where must duplicate copies and GPS observed data be stored and submitted?
In digital form
13What DMC 2010-13 section governs the digital storage of GPS observed data?
Section 166.c
14What format must be used for plans of isolated surveys used for administrative or judicial registration?
LMB prescribed format
15What is required if isolated survey plans are prepared using a computerized method?
Authority from the LMB and evaluation of sample print-out
16How must property boundaries be drawn on isolated survey plans?
In full black ink line heavier than those of adjoining properties
17How must permanent walls along boundaries be drawn on isolated survey plans?
By conventional symbols
18How must lines from lot control stations to side shots be drawn?
By dotted red ink lines
19How must adjoining survey properties and owners be indicated on isolated survey plans?
By dotted lines indicating boundaries, names of owners, improvements, roads, and streams
20What shape and size must lot corners be drawn on isolated survey plans?
Small circles two millimeters in diameter drawn in black ink
21How must boundary lines with bearings and distance be drawn on isolated survey plans?
In black ink
22How must the tie line of corner 1 from reference control point be drawn?
In thin black line with bearing and distance
23What lines must pass through corner 1 in thin black line on isolated survey plans?
Horizontal latitude and vertical longitude lines
24What coordinate systems must be indicated in black ink on isolated survey plans?
Geographic and Cartesian coordinates in PPCS-TM/PRS 92
25How must vertical and horizontal center lines divisible by five be drawn on original plans?
Accurately drawn and inked in red
26Where must the corresponding northing based on BLLM No. 1 be written along the latitude line?
Above along the latitude line from the left-hand border line towards the right
27Where must the geographic latitude be indicated relative to northing?
Below the northing
28Where must the easting based on BLLM No. 1 be written along the longitude line?
On the left side of and along the longitude line from the bottom border line towards the top
29Where must the geographic longitude be indicated relative to easting?
Opposite the easting on the other side of the longitude line
30What annex of DMC 2010-13 provides the table of scales for plotting isolated plans?
Annex XXIV
31What is the minimum distance extreme corners must be from each marginal line when plotting a lot?
Four centimeters
32What scale must be used when the maximum coordinate difference exceeds three thousand meters?
Scales that are exact multiples of 1:4,000 such as 1:12,000 or 1:16,000
33Where must bearings and distances be tabulated when they are too numerous to be drawn clearly along boundary lines?
On the plan
34When must lot descriptions be prepared on LMB authorized forms?
When there are more than fifty lots on the plans
35Where must boundary data of a lot being subdivided or consolidated be tabulated on subdivision plans?
In a boxed portion at the upper-left corner
36Where must information that cannot be inscribed on the plan be indicated?
On the space provided for Notes at the bottom left corner
37What Annex of DMC 2010-13 provides illustrations as a guide on what to include in the Notes?
Annex XXV
38What Annex of DMC 2010-13 shows how plans of isolated land survey shall be prepared?
Annex XXVI
39What style of lettering must be used on all isolated survey plans?
Simple, uniform, mechanical, and not ornamental lettering
40How must the approximate boundary of cultivated areas and vegetation be indicated for lots with areas of one hectare or more?
In light black dotted lines
41What must be indicated on plans for lots less than one hectare in area?
A general classification such as residential lot or rice land
42How must permanent structures like buildings with concrete foundations be indicated on plans?
By dotted black lines regardless of area
43What document replaces the project contract in political boundary survey returns if funded by the LGU?
A Sangguniang Bayan Resolution
44What local government certifications are required in political boundary survey returns?
Certification of the Barangay Chairmen and Municipal Mayor as per boundary agreement and conformity of adjoining municipalities
45What law governs Mineral Land Survey Returns?
DAO No. 96-40 implementing Republic Act No. 7942
46What is Republic Act No. 7942 otherwise known as?
The Philippine Mining Act of 1995
47What field report with inspection and photo documentation is required for forestland delimitation returns?
Field Completion Report from CENRO
48Who issues the Certificate of Acceptability for Forestlands and National Parks Delimitation Survey returns?
The PENRO
49Who must sign the Joint Endorsement for Forestlands and National Parks/Protected Areas Delimitation Survey returns?
The RTDs for Forestry, Lands, and PAWCZMS
50What does FPABM stand for in Forestland and Protected Areas Delimitation Survey maps?
Forestland and Protected Area Boundary Map
51Who must sign the Forestland and Protected Area Boundary Map?
The Chief of RCST